Operating The Device; Screen And Icons - Xblitz PRISM User Manual

d. set G-Sensor to the lowest possible sensitivity so that the camera does
not pick up unevenness on the road and secure unnecessary recordings.
4. Make sure that PARKING MODE and TRACE DETECTION are turned o .
If they stay turned on during normal use, they will a ect the recording.
Activating these options is only recommended when leaving the vehicle
parked.
5. The camera will start recording automatically every time the engine is
turned on and end when the engine is turned o (as long as your car does
not have a permanent power supply in the cigarette lighter socket).

06. OPERATING THE DEVICE

The camera has a touch screen with which we operate the device.
POWER
RESET

07. SCREEN AND ICONS

VIDEO MODE
2
1
13
12
Hold for 3 seconds to turn the camera on or o .
A short press turns the erkan on and o .
Pressing resets the camera and restores the default
settings on the camera.
3 4 5
23
6
7
8
9
10
11