Table of Contents
Advertisement
INSTALLER SETTING
170
Forced operation
• If the product is not used for a long time, the pump will be forced to operate to prevent pump
failure and PHEX freezing.
• Water pump off After 20 consecutive hours, disable / enable the logic that drives the water
pump by itself.
• In the installer setting list, select Forced operation category, and press [OK] button to move to
the detail screen.
Oper. Cycle
Oper. Time
Value
-
20 hours
OK
Default
Use
Use / Not Use
20 ~ 180 hours
10 min
1 ~ 60 min
Range
Advertisement
Table of Contents
