Select Temperature Sensor - LG THERMA V HM141MR Installation Manual

INSTALLER SETTING
140

Select Temperature Sensor

The product can be operated according to air temperature or leaving water temperature. The
selection for setting temperature as air temperature or leaving water temperature is determined.
• In the installer setting list, Select Temperature Sensor category, and press [OK] button to move
to the detail screen.
Value
Control Standard
Sensor Location
* When Water is selected, Sensor Location is disabled.
NOTE
• When the sensor location is set to indoor unit, Remote Air Sensor Connection and the
change of DIP switch setting(No. 1 of Option Switch 3) are required
• When the sensor location is set to Remote Control, the RS3 controller must be placed
inside of suitable Reference room.
OK
Default
Water
Remote Control
Range
Water / Air / Air + Water
Remote Control / Indoor Unit