Remote Controller - LG THERMA V HM141MR Installation Manual

ACCESSORIES INSTALLATION
84

Remote Controller

Installation of Remote Controller
• After fixing the remote controller installation plate on the desired location, fix it firmly with the
provided screws.
- If the installation plate is not flat on the surface, it may result in the controller being twisted
and cause a defect.
- If there is a mounting box, install the remote controller installation plate using the fixings holes
which suit, as in the below diagrams.
- Do not leave a gap with the wall or product loose after the installation.
- If you are using the air temperature sensor in the remote control, refer to the Remote
Temperature sensor guide.
• The wired remote controller cable can be installed in 3 directions. Install to the suitable
direction according to the installation environment.
- Installation direction: Rear entry, top side, right side
- When you install the remote controller cable at the top side and right side, remove the remote
controller cable guide hole before the installation.
※ Use a long nose pliers to remove the guide hole.
• After removing the hole, trim the cut surface neatly.
Right side guide
groove
Rear cable entry
Top side guide groove
Top side guide groove
Right side guide
groove