INSTALLATION OF OUTDOOR UNIT
36
INSTALLATION OF OUTDOOR UNIT
The outdoor unit is installed outside to exchange heat with ambient air.
Therefore, it is important to secure proper space around the outdoor unit and care for specific
external conditions. This chapter presents a guide to install the outdoor unit, make a route to
connect with the indoor, and what to do when installed around seaside.
Conditions to be considered when installing the outdoor unit
For noise reduction
NOTE
• Please do not block the slits in the exterior panels!
Minimum Operation Space
Following distances around the outdoor unit must be respected under any condition for normal
operation. The distances are only for operation not to be seen as safety zone.
Installation space around each unit
1 m
0.1 m
0.6 m
Multiple installation
0.3m
0.5 m
For good ventilation
0.5 m
0.6 m