Forced Operation - LG DMC24DB-1 Owner's Manual

Additional features
Auto clean
1. Whenever you press the AUTO CLEAN button, Auto Clean Function will be selected
AUTO CLEAN
2. Auto Clean function works before and after cooling or dehumidification mode. For
3. When the unit is started after selecting Auto Clean ,the Cool Start function operates
4. When you press Start/Stop button to turn off the unit after the you have selected
5. If you press the AUTO CLEAN button again during the product operation , Auto
NOTICE
During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
Dehumidification Operation can be removed.
During Auto Clean function, only Start/Stop button, Plasma button and AUTO CLEAN button are
available.

Forced Operation

The operation will be started operation if the power button is pressed without remote controller.
If you want to stop operation, re-press the button.
Cooling Model
Operating mode
Indoor FAN Speed
Setting Temperature
20 Room Air Conditioner
or cancelled.
details, refer to the below points.
and indoor Fan is started after 20 seconds.
Auto Clean function, the air-conditioner circulates the indoor air in the Auto Clean
mode with no more Cooling or Dehumidification operation. It lasts for 30 minutes.
Clean function will be cancelled.
Room Temp. 24°C(76°F) 21°C(70°F) Room Temp. < 24°C(76°F) Room Temp. < 21°C(70°F)
Cooling Cooling
High High
22°C(72°F) 22°C(72°F)
ON/OFF
button
Heat pump Model
Healthy Dehumidification
High
23°C(74°F)
Heating
High
24°C(76°F)