Tool Templates; Add Tool Templates - norbar T-Box 43236 Operator's Manual

TOOL TEMPLATES

There are 2 variants of Tool Template:
• 'ISO 6789' for Torque Wrenches & screwdrivers
• 'Other' Type Tool Templates for PneuTorques, EvoTorques etc.
When a Tool Template is attached to a Tool and sent to a T-Box XL™ when synchronizing, the Tool can be
selected on the T-Box XL™ for Calibration or Use and T-Box XL™ will operate according to the settings for
the Tool Template.
TIP: To reduce the number of Tool Templates you have to scroll through on the T-Box XL™, delete
the ones you do not require and connect to T-Box XL™. Use Send Updates Now to remove
the unwanted Tool Templates from T-Box XL™.

Add Tool Templates

1. Select the Define menu then select Tool Templates (or select
2. The list of Tool Templates is shown in the right pane.
).
27