Create Calibration Certificate From T-Box Xl™ Calibration Data - norbar T-Box 43236 Operator's Manual

Create Calibration Certificate from T-Box XL™ Calibration Data
1. Calibrate a Tool on T-Box XL™ and then
Synchronize with TDMS.
2. Select Calibration Data to show results
in the right hand pane.
3. Right click on the Calibration Data to show
the drop down menu.
4. Select Create Calibration Certificate
NOTE: The
has been created.
5. Select or enter an Inspector
6. Enter Certificate Number (if required)
7. Enter the Temperature (in degrees C) that the calibration was performed
8. Enter Certificate Text
Choose either As Found or As Left from the drop down
or enter your own text.
9. If the same tool has other calibration data to put on the same certificate, press Select Results
This feature allows clockwise & anti-clockwise as well as 'as found' & 'as left' results to be included on
the same certificate.
To add another calibration to the same certificate double click on the required results.
icon will be shown in front of a Tool that has been calibrated but no certificate
(this must be entered).
(this must be entered).
55