T-Box Software Compatibility; Introduction; Features And Functions - norbar T-Box 43236 Operator's Manual

T-BOX SOFTWARE COMPATIBILITY

Ensure T-Box / T-Box XL™ & TDMS are compatible as shown in table below.
Instrument
T-Box
Model # 43236
T-Box XL™
Model # 43258

INTRODUCTION

The Torque Data Management System (TDMS) is PC software designed to complement the T-Box XL™
Torque measuring instrument. The user friendly interface will enable certificate generation and data archiving
for all types of torque tools.
Torque, Torque and Angle or Torque and Speed graphs captured on the T-Box XL™ can be sent to TDMS to
be viewed, stored and printed.
Data can be exported to Microsoft
Part numbers covered by this manual: 37748 Torque Data Management Software (TDMS) available on part
number 61132 (USB Flash Drive supplied with T-Box XL™).

FEATURES AND FUNCTIONS

USB connection to Norbar T-Box XL™ instrument for fast data transfer.
•
Data transfer between TDMS and T-Box XL™ via a USB stick.
•
• Norbar standard Tool Templates for N∙m, lbf∙ft, lbf∙in & kgf∙cm are supplied pre-loaded.
• Generate calibration certificates from other Norbar instruments (e.g. TTT, TST & Pro-Test) via RS232.
Database for archiving of data for calibration (and Use) of Torque Tools.
•
Statistical Process Control (SPC) output (including standard deviation, Cp & Cpk) with histogram of
•
results.
Set up individual (or multiple) T-Box XL™'s with Tools, Tool Templates, Targets and Non-Smart
•
Transducers via the synchronisation options or USB stick.
Multilingual Calibration Certificate (English / Finnish / French / German / Hungarian / Italian / Norwegian
•
Polish / Russian / Spanish).
Calibration certificate templates to ISO6789-2:2017.
•
• Declaration of conformance templates to ISO6789-1:2017.
• Uncertainty data management system for ISO6789-2:2017 tools.
Calibration certificate templates for PneuTorque
•
Ability to add a Setting (i.e. p.s.i.) and setting values against Torque calibration results on a Calibration
•
Certificate.
Torque vs Air pressure graphs can also be saved, viewed and printed.
•
• Compatible with Windows
Instrument
Software
Versions
< 1.0.2.24
1.0.2.24
< 2.2.0.X
2.2.0.X
3.0.0.X
Excel and/or any other equivalent packages via the Clipboard.
® ®
® XP, 7, 8.1 & 10
TDMS Software 37748 Versions
3.3.X
Not compatible
OK (limited)
Not compatible
OK
Not compatible
, etc.
®
4.0.X
Not compatible
Not compatible
Not compatible
Not compatible
OK
3