Table of Contents
Advertisement
1.3
Operations carried out on the device
Battery replacement:
To ensure complete leak-tightness of the photometer, you must insert the
gasket (2) and screw on the battery compartment lid (1).
If the battery is removed for more than 1 minute from the device, then when
the device is switched on again with new inserted batteries, the date/time
program appears automatically.
Fig. 3: Battery replacement
1. Battery compartment cover
2. Seal
3. Screw
4. Batteries
5. Rear of the device
General Information
A0939
11
Advertisement
Table of Contents
