ycom eSC S1-X User Manual page 56

27.
Bag for transportation
Each scooter has a semi-soft carrying bag. The bag is composed by 4 pieces:
Handlebar Bag
To insert the scooter inside the bag it is necessary to disassemble:
1) Front cover
2) Steering column. If necessary, cut the plastic clamps that hold the wiring
3) The handlebar, removing the stem from the steering column. During this operation pay attention to the wiring
4) Disassemble the wirings is not needed.
After disassembly, place the components in their bags as shown in the following images:
| eSC S1-X – User manual
Main Bag
Steering Column Bag
Image 3021 - Transportation bag overview
Front Cover Bag
56