Table of Contents
Advertisement
6.
Safety
•
It's forbidden to open or tune electric or electronic parts (battery, inverters, SCU, DC/DC etc.). This would
compromise the operation of the scooter.
•
Before starting any installation or work, when the battery is connected to the eSkootr, remember that there is
voltage in the cables, so be careful of wrenches or tools that could generate short circuits.
•
If parts of the body as finger or hair get caught in the spinning parts of the scooter, this may lead severe injuries.
Please be careful.
•
If the product is lifted by holding the handlebar, there is a possibility that the scooter may be damaged. When
lifting, be sure to hold the scoter by the front fork or front pins and rear pins or footrest.
•
Before starting any run remember to wear the wrist bracelet of the Wrist kill Switch.
•
Be careful when handling dry ice. Use appropriate protective gloves and goggles. Don't breathe it.
|
eSC S1-X – User manual
10
Advertisement
Table of Contents
