Table of Contents
Advertisement
24.
Inverters
The eSkootr uses 2 inverters to control front and rear motor.
NB:
•
Remember that each motor is paired with some specific parameters on the related inverter: if you replace a
motor, eSC or YCOM must update the inverter software to not affect scooter performances
NB:
•
Max torque for inverter screws: max 2.2 Nm
NB:
•
If inverters are disassembled from the heatsink before reassembly always add Aluminium Oxide thermal paste
(3.5 W/mK) between inverter and heatsink
|
Image 2518 - Inverters wiring and connection
eSC S1-X – User manual
max 2,2Nm
51
Advertisement
Table of Contents
