ycom eSC S1-X User Manual page 49

MAP SAVING AND IMPORT
In support to a quick map upload, user can save maps into file and retrieve them. To do that user needs to select File from
top menu and save to create a new map file or Load to retrieve an existing map file.
Below and example of the file created whit map export:
This allows to build a map file database and change maps setting quickly.
If you want to update the Maps in the SCU:
1) Set the scooter in P0
2) Connect the USB cable of the SCU to the PC and to the SCU
3) Go back to P1
4) Open SCU Monitor clicking on the desktop icon:
5) Open the software and:
- Select the right COM Port
- Click on the Monitor Icon
6) Go in File Load
→
7) Select the right file (.stx)
8) Click Enter
9) Set the scooter in P0
10) Done.
THROTTLE
The blue bars showed above correspond to the throttle command. With this the power demand, according the map
setup, can be checked.
| eSC S1-X – User manual
49