How To Install The Driver & Software - ycom eSC S1-X User Manual

SOFTWARE PC FOR MONITORING DURING CHARGING PHASE
The Datalogger BMS is a PC software that allows connection between a PC and charger using the Bluetooth dongle. The
feature are monitor the voltages of each single cell, the temperatures of the battery pack and the BMS, charging current,
system history by viewing the registers containing the main events that have occurred over time and graphs of voltages,
currents and temperatures in real time.
HOW TO INSTALL THE DRIVER & SOFTWARE
1) Download the driver here.
2) Install the driver located in DRIVER SW PC
3) Restart the PC
4) Install the dongle Bluetooth driver located in DRIVER DONGLE BLUETOOTH
• Do not connect the dongle to the PC. It will be connected at the end of the installation.
• Right click on the dfu.inf file and select install.
•
Right click on the usbserial.inf file and select install.
5) Connect the dongle Bluetooth in the PC.
6) Restart the PC.
7) Download the software here.
8) Install Datalogger REV40-10 YCOM CONC PWD.exe
9) Done
HOW TO USE THE DATALOGGER
1) Connect the dongle Bluetooth in the PC
2) Place the dongle as close as possible to the Charger
3) Start Datalogger software double clicking on the desktop icon
4) Start the Charger
5) In the main screen of the software, in the COM PORT section select the right one
6) Click the "Bluetooth" icon
7) Click the "Scan" button and select the right device
8) Click the "Connect" button
9) Return to main screen
10) Press on "Mesures"
11) Insert the password (provided by eSC)
12) Done
| eSC S1-X – User manual
→ Volume → setup.exe
→ windrv as follow:
39