HOW TO USE THE COOLING SYSTEM
After connecting the workbench to the electrical net (via industrial sockets – IN) and connected the motor of the central
stand to the schuko sockets (OUT):
1) Put the scooter on the stand
2) Connect all the pipes
3) Connect the cooling system on the motors
4) Put dry ice in the tank (if needed)
5) Turn on the cooling system
NB:
•
For battery cooling refer to WAE manual
•
Be careful when handling dry ice. Use appropriate protective gloves and goggles. Don't breathe it.
|
eSC S1-X – User manual
Image 28 - Piping connections
54