Hpe Smart Storage Hybrid Capacitor - HP ProLiant ML30 Gen10 Plus User Manual

HPE Smart Storage Hybrid Capacitor

HPE Smart Storage Hybrid Capacitor
The HPE Smart Storage Hybrid Capacitor supports the following devices:
HPE SR controllers
The capacitor pack can support up to two devices.
This server supports the HPE Smart Storage Hybrid Capacitor with the 145 mm cable.
Before installing the HPE Smart Storage Hybrid Capacitor, verify that the system BIOS meets the minimum firmware requirements to
support the capacitor pack.
IMPORTANT: IMPORTANT:
If the system BIOS or controller firmware is older than the minimum recommended firmware versions, the capacitor
pack will only support one device.
The capacitor pack is fully charged after the system boots.
HPE Smart Storage Hybrid Capacitor 126