Table of Contents
Advertisement
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server .
17. To configure the M.2 SSD, do one of the following:
M.2 SATA SSD: Use Intel VROC. See the OS-specific Intel VROC guide.
M.2 NVMe SSD: Use the native OS NVMe driver. See the related OS documentation.
The installation is complete.
Installing an M.2 SSD on the iLO-M.2-serial module
166
Advertisement
Table of Contents
Troubleshooting
