Table of Contents
Advertisement
7. Install the access panel .
8. Do one of the following:
Orient the server back in tower mode.
Install the server into the rack .
9. Connect all peripheral cables to the server.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server .
13. To configure the memory settings:
a. From the boot screen, press F9 F9 to access the UEFI System Utilities.
b. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Memory Options.
The installation is complete.
Installing a DIMM
139
Advertisement
Table of Contents
Troubleshooting
