Content Of The Package - WEG CFW100 Installation, Configuration And Operations Manual

Remote Serial HMI

3 CONTENT OF THE PACKAGE

Upon receiving the product, check if the package
contains:
Accessory in anti-static package.
„
RS485 (CFW100-CRS485) module.
„
3-m mini USB cable.
„
Installation, configuration and operation guide.
„
4 INSTALLATION OF THE ACCESSORY
The CFW100-KHMIR accessory is easily connected
to the CFW100 frequency inverter by means of the
plug-and-play concept. The procedures below must
be observed for the proper installation and start-up:
1. With the inverter de-energized, remove the front
cover of the inverter shown in
2. Connect the CFW100-CRS485 accessory (RS485
module) to the inverter as shown in
further details, refer to the Installation, Configuration
and Operation Guide of the CFW100-CRS485
module.
3. Connect the cable to the CFW100-KHMIR and
CFW100-CRS485 as indicated in
4. Energize the inverter and check that the display of the
remote serial HMI shows the same indication as the
inverter HMI. Otherwise, repeat items 1-4, checking
the cable connections.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
figure A.1 (a).
figure A.1
figure A.1
(b). For
(c).