Table of Contents
Advertisement
17.2. Water overtemperature (switch off without alarm)
If the water in the product reaches a temperature of 85°C, the product switches off without going into alarm.
The message STBY appears on the display next to the room temperature.
The product works, but maintenance must be carried out by the Edilkamin qualified technician.
17.3. Maintenance (message that does not cause switch-off)
After 2000 hours of operation, a "wrench" symbol appears on the display
The product works, but maintenance must be carried out by the Edilkamin qualified technician
In some models the symbol may be linked to a fuse problem on the motherboard.
Contact the Technical Assistance Centre (CAT).
Remember that seasonal maintenance by a qualified technician, and according to national and
local regulations, is necessary.
78
Advertisement
Table of Contents
