Table of Contents
Advertisement
14.4. First power supply
When switching on for the first time, if the language has not been set, the "Language, Date, etc." menus will appear
(explained in the dedicated chapter)
14.5. Simplified use, upon first start-up and default setup
In the default setup, after connecting the product to the electrical power supply, press the ON/OFF key on the display
to "activate" it and set the desired room temperature using the +/- keys. The product will automatically switch on,
switch off and adjust the power to ensure the desired temperature.
In the example below, the temperature read is 14.9°C and the initial set temperature (SET) is 20.0
With Stand-By deactivated, the product will modulate to try to maintain the SET temperature (in the example 19.5°C).
With Stand-By active, it will switch on/off with the same aim.
The product is programmed by default with a 1°C delta to ensure the greatest comfort.
The technician can change this setting during the initial start-up to meet the customer's
requirements.
For example, if 20°C is set as the room temperature, the product will go into modulation/switch
off when 20°C is exceeded and will switch on again below 19°C.
48
Advertisement
Table of Contents
