16. DISPOSAL
At the end of its service life, dispose of the product in accordance with current regulations.
16.1. Warnings for the correct disposal of the product
The demolition and disposal of the product are the sole responsibility of the owner who will have to act in compliance
with the applicable laws in their country on safety, respect and protection of the environment.
Do not dispose of with municipal waste.
Do not throw it away.
16.2. Disposal of the components of the appliance at the end of its service life
The following table lists the components of the appliance and the indications for correct separation and disposal.
In particular, the electrical and electronic components must be separated and disposed of at the centres authorised
for this activity, according to the WEEE directive 2012/19/EU.
A. EXTERNAL COVERS
If present, dispose of it separately according to the
material it is made of:
• Metal
• Glass
• Tiles or ceramics
• Stone
B. GLASS AND DOORS
If present, dispose of it separately according to the
material it is made of:
The drawings are indicative
C. INTERNAL LINING
If present, dispose of it separately according to the
material it is made of:
• Metal
• Refractory materials
• Insulating panels
• Vermiculite
• Insulating panels, vermiculite and refractory materials
coming into contact with the flame or the exhaust gases
(dispose of in mixed waste)
D. ELECTRICAL AND ELECTRONIC COMPONENTS
If present, dispose of it separately according to the
material it is made of:
74