Table of Contents
Advertisement
9.2. Possible washing of the hydraulic circuit
Install suitable shut-off valves on the pipes of the heating system.
To preserve the heating system from harmful corrosion, scaling or deposits, it is important,
before installing the appliance, to wash the system in accordance with Standard UNI 8065, using approved products.
It is important to check the concentration of the inhibitor after each change made to the system and each time a
maintenance check is performed, as indicated by the manufacturers (special tests are available from retailers).
Failure to wash the heating system and to add a suitable inhibitor will invalidate the warranty of the appliance and of
other accessories, such as the pump and valves.
9.3. Pressure gauge for system pressure reading
The water pressure is shown on the display. Therefore, there is no analogue pressure gauge.
9.4. Optional hydraulic kits
Edilkamin offers internal hydraulic kits (optional)
There are templates of the kits available for technicians (scale 1:1)
9.5. Venting
During operation, venting is automatic.
Gurgling
During the first start-ups, any gurgling indicates air in the system
29
Advertisement
Table of Contents
