Table of Contents
Advertisement
2.3.2 Removing the SFP/SFP+ Transceiver
1.
Make sure there is no network activity by consulting or checking with the network administrator. Or through the
management interface of the switch/converter (if available) to disable the port in advance.
2.
Remove the fiber optic cable gently.
3.
Turn the lever of the SFP/SFP+ transceiver to a horizontal position.
4.
Pull out the module gently through the lever.
Never pull out the module without pulling the lever or the push bolts on the module. Directly pulling
out the module with force could damage the module and SFP/SFP+ module slot of the device.
3. SWITCH MANAGEMENT
This chapter explains the methods that you can use to configure management access to the Industrial Managed Switch. It
describes the types of management applications and the communication and management protocols that deliver data between
your management device (workstation or personal computer) and the system. It also contains information about port connection
options.
User's Manual of IGS-5225-8T2S2X & 8P2S2X series
Figure 2-12: Pull out the SFP/SFP+ Transceiver Module
43
Advertisement
Table of Contents
