Bridge Status - Planet Networking & Communication IGS-5225-8T2S2X User Manual

•
Edge Port BPDU Guard
• Port Error Recovery
•
Port Error Recovery
Timeout
The Industrial Managed Switch implements the Rapid Spanning Protocol as the default spanning
tree protocol. When selecting "Compatibles" mode, the system uses the RSTP (802.1w) to be
compatible and to co-work with another STP (802.1D)'s BPDU control packet.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.3.4.3 Bridge Status

This page provides a status overview for all STP bridge instances. The displayed table contains a row for each STP bridge
instance, where the column displays the following information: The Bridge Status screen in
The page includes the following fields:
Object
•
MSTI
•
Bridge ID
•
Root ID
User's Manual of IGS-5225-8T2S2X & 8P2S2X series
Control whether a port explicitly configured as Edge will disable itself upon
reception of a BPDU. The port will enter the error-disabled state, and will be
removed from the active topology.
Control whether a port in the error-disabled state automatically will be enabled
after a certain time. If recovery is not enabled, ports have to be disabled and
re-enabled for normal STP operation. The condition is also cleared by a system
reboot.
The time that has to pass before a port in the error-disabled state can be
enabled. Valid values are between 30 and 86400 seconds (24 hours).
Figure 4-3-4-5: STP Bridge Status Page Screenshot
Description
The Bridge Instance. This is also a link to the STP Detailed Bridge Status.
The Bridge ID of this Bridge instance.
The Bridge ID of the currently elected root bridge.
171
Figure 4-3-4-5 appears.