Yealink W70B User Manual page 53

2. When the first party answers the call, select Options > Conference.
On the CP930W, select Conf..
On the DD phone/CP935W, select Conference.
The active call is placed on hold.
3. Dial the second party's number.
4. When the second party answers the call, select Conf. to invite two parties to join the conference.
On the DD phone/CP935W, select Conference.
Merging Two Calls into a Conference
You can invite a held call into a conference call with the active call.
Procedure
1. Place two calls on the phone.
2. Select Options > Conference.
On the CP930W, select Conf..
On the DD phone/CP935W, select Conference.
Inviting an Incoming Call to a Conference
You can create a conference when the phone receives an incoming call during the call(s) or a conference.
About this task
It is only applicable to CP930W/CP935W.
Procedure
Tap Join when the phone receives a new call.
On the CP935W, tap Join Conf.
The conference among the original call(s) and the incoming call is set up. If you are in a conference, the new party
will join the conference.
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants cannot hear each other until you resume the
held conference call.
About this task
It is only applicable to CP930W/CP935W.
Procedure
1. Tap Hold to place the conference on hold.
2. Tap Resume to resume the held conference call.
Muting/Unmuting a Conference Call
When you mute the local microphone during a conference call, other participants can hear each other
except you.
Procedure
1. Press the MUTE key to mute the conference.
| Call Features | 53