Siemens SINAMICS S120 Getting Started page 16

Creating a drive project
3.1 Setting the communications interface
3. In the dropdown list "Access Point of the Application", select entry
"DRIVES (STARTER, SCOUT) --> CP5511(PROFIBUS)".
4. Click on button "Properties" in order to set the interface.
The "Properties - CP5511(PROFIBUS)" window opens as well.
5. Set the address to "0".
A data transmission rate of 1.5 Mbit/s or above is recommended.
6. Click on "OK".
The "Properties" window closes.
16
All manuals and user guides at all-guides.com
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
Getting Started