Siemens SINAMICS S120 Getting Started page 22

Configuring your drive project
4. Select drive object S120_CU320_2_DP with the right-hand mouse button and select
command Target device > Restore factory settings in the context menu.
5. Click on "OK" to confirm the prompt.
The PG/PC sets the drive parameters to their factory settings. The new status is
transferred to the memory card of the CU320_2_DP Control Unit.
The factory settings are now restored and the drive is in a defined state.
22
All manuals and user guides at all-guides.com
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
Getting Started