Sunny Health & Fitness SMART SF-T7705 User Manual page 22

E06: Motor Abnormality
E08: Control
Abnormality
E10: Motor Abnormality
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
contact Customer Service at support@sunnyhealthfitness.com.
The motor
connected, or the motor is
damaged.
Board The control board is not
connected.
The motor is damaged, or a
moving part of the treadmill is
stuck and therefore the motor
is unable to rotate properly.
Check motor wires to see if the
motor is connected. If the wire
wire is not has
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the motor.
Check the upper and middle
wires to see if the control board
is connected. If the wire has
been punctured or damaged,
you will need to replace it. If the
problem is not rectified, you
may need to replace the control
board.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly.
Replace the motor if necessary.
21
been punctured or