App Connection - Sunny Health & Fitness SMART SF-T7705 User Manual

"START" button, the treadmill will continue to work. If you press "STOP" button, the treadmill will stop
and all data recover to initial setting.
SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1
MPH. Pressing and holding either of these buttons for a duration of over ½ of a second will increase or
decrease the speed continually.
INCLINE UP/DOWN BUTTONS: Press this button to adjust incline. When the treadmill is running, press
the Up & Down buttons to increase or decrease the incline in increments of 1/time. Pressing and holding
either of these buttons for duration of over ½ a second will increase or decrease the incline continually.
The incline levels range from 0-15.
2, 4, & 6 (QUICK SPEED BUTTONS): These buttons are preset to 2, 4, or 6 MPH speeds for
convenience.
QUICK INCLINE BUTTONS 3%, 6%, 12%: These buttons are quick incline presets which allow you to
select an automatic running incline of 3%, 6%,12% instantly with a push of a button.

APP CONNECTION:

1. Scan below QR code to enter the app store and download the Sunny Health & Fitness app to your
mobile phone.
2. Press the Bluetooth switch to connect. Then you can use the app through your mobile
phone.
LUBRICATION REMINDER:
Your treadmill needs lubrication maintenance every 188 MILES. The system will release a beeping
sound every 10 seconds and display an "OIL" icon on your LCD display to remind you when it's time.
Please read the LUBRICATING THE TREADMILL on Page 10 to learn the proper steps to lubricate
your treadmill. Apply the lubricant to the middle of the running board on both sides. After application,
press and hold the STOP button for 3 seconds to clear the "OIL" reminder.
INTERVAL PROGRAMS (P1-P9):
Press the PROGRAM button to select an interval setting. Programs are displayed as P1-P9. Select the
desired program, and the console will display a countdown starting from 10:00 MINS, press SPEED +/-
or INCLINE UP/DOWN buttons if you wish to increase or decrease the exercise time. Press the START
button to start the interval program. The interval program is divided into 10 sections. Each exercise time
equals the setting time divided by 10. When the speed enters the next interval, the treadmill will beep,
and the speed will be changed according to the set interval. Press SPEED +/- or INCLINE UP/DOWN
buttons to change the SPEED and INCLINE. After finishing one program, the system will beep and
display "End". The treadmill will gradually come to a stop, then automatically reset to the initial setting
after 5 seconds.
16