Quick Reference Table - Supermicro SuperServer 1029P-MT User Manual

SuperServer 1029P-MT/MTR User's Manual

Quick Reference Table

Jumper Description
JBT1 Clear CMOS
JPG1 VGA Enable/Disable
JPME2 Manufacturer (ME) Mode Select
JVRM1 VRM SMB Clock (to BMC or PCH)
JVRM2 VRM SMB Data (to BMC or PCH)
JWD1 Watch-Dog Timer
Connector Description
Battery (BT1) Onboard COMS battery
COM 1 Front Panel COM Port 1
FAN 1~6 System cooling fan headers
FANA/FANB Thermal fan headers for I/O add-on cards
JF1 Front_Panel_Control Header
J25 USB 2.0 Header for USB Ports 2/3
J26 USB 3.0 Type A port for USB4
JPWR1/2 8-pin Power Connector
JPWR3 24-pin Power Connector
JPI2C1 Power Supply I
JSD1/JSD2 Power connector for SATA DOM
JSTBY1 Wake On LAN Header
IPMI_LAN Dedicated IPMI LAN port
JIPMB1 4-pin external BMC I²C header (for an IPMI card)
JNVI C1 NVMe I
2
JRK1 RAID key for CPU NVMe SSD
JSDCARD1 Micro SD Card slot
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
M.2 M.2 Slot
(I-)SATA0~3, 4~7 I-SATA 3.0 connectors supported by the Intel PCH
(S-)SATA0/1 S-SATA 3.0 connectors supported by the Intel PCH
SP1 Internal Speaker
USB0/1 Back panel USB 3.0 ports
VGA VGA port
LED Description
LE1 UID (Unit Identifier) LED
LE6 Onboard Power LED
LEDM1 BMC Heartbeat LED
C Connector
2
C headers
2
14
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (Reset)
Status
Solid Blue: Unit Identified
Solid Red: Standby
Solid Green: Power On
Blinking Green: BMC Normal