Advertisement
Quick Links
SuperServer 1029U-T Series Quick Reference Guide
Board Layout
1
2
3
4
5
6
IPMI_LAN USB0/1 (3.0)
VGA
JUIDB2
COM1
LED1
UID
LEDM1
BMC
S-UM12
JSDCARD1
LAN
CTRL
JTPM1
JRK1
BT1
JBT1
PCH
SP1
18
PSU2
17
JSD2
JSD1
JHFI1
JNVI2C1
GPU PWR1
P1_NVMe0 P1_NVMe1
JHFI2
BIOS
X11DPU
DESIGNED IN USA
LICENSE
REV:1.10
BAR CODE
IPMI CODE
JF1
CPU1
CPU2
LEDPWR
JF1
JL1
FAN3
FAN5
10
16
15
14
13
12
11
9
No.
Description
1
SXB1A/1B/1C: Proprietary PCI-e Slot used for WIO-Left Devices (supported by CPU2)
2
SXB2: Proprietary PCI-e 3.0 x8 Slot for WIO-Right Devices or Add-on Cards (supported by CPU2)
3
JBT1: CMOS Clear
4
I-SATA0~3: SATA 3.0 Ports (Intel PCH)
JSD1/JSD2: SATA DOM (Device_on_Module) Power Connectors
5
SXB3A/3B/3C: Proprietary PCI-e Slot for Ultra Riser Devices (supported by CPU1)
6
P1-DIMMC1(Blue)/P1-DIMMC2/P1-DIMMB1(Blue) slot
7
8
P1-DIMMB2/P1-DIMMA1(Blue)/P1-DIMMA2 slot
9
CPU1 (Install CPU1 first)
10
P1-DIMMD2/P1-DIMMD1(Blue)/P1-DIMME2 slot
P1-DIMME1(Blue)/P1-DIMMF2/P1-DIMMF1(Blue) slot
11
12
P2-DIMMC1(Blue)/P2-DIMMC2/P2-DIMMB1(Blue) slot
13
P2-DIMMB2/P2-DIMMA1(Blue)/P2-DIMMA2 slot
14
CPU2
15
P2-DIMMD2/P2-DIMMD1(Blue)/P2-DIMME2 slot
16
P2-DIMME1(Blue)/P2-DIMMF2/P2-DIMMF1(Blue) slot
17
S-SATA 4, 5: SATA 3.0 Ports (Intel SCU)
18
S-SATA0~3: SATA 3.0 Ports (Intel SCU)
Memory
DDR4 Memory Support for the Intel Xeon Scalable Processor Platform
Speed (MT/s); Voltage (V); Slots per Channel (SPC) and
Ranks
DIMM Capacity
Per
(GB)
Type
DIMM
and Data
1DPC (1-DIMM per Channel)
Width
4 Gb
8 Gb
RDIMM
SRx4
8 GB
16 GB
RDIMM
SRx8
4 GB
8 GB
RDIMM
DRx8
8 GB
16 GB
RDIMM
DRx4
16 GB
32 GB
QRX4
N/A
2H-64GB
RDIMM 3Ds
8RX4
N/A
4H-128GB
PSU1
LRDIMM
QRx4
32 GB
64 GB
QRX4
N/A
2H-64GB
LRDIMM 3Ds
8Rx4
N/A
4H-128 GB
Front & Interface
HDD 1
HDD 3 HDD 5 HDD 7 HDD 9
(SATA3)
(SATA3) (SATA3) (SATA3) (SATA3)*
HDD 0 HDD 2 HDD 4 HDD 6 HDD 8
(SATA3) (SATA3) (SATA3) (SATA3) (SATA3)*
*Optional NVMe support from CPU1
FAN2
FAN1
No.
Description
No.
Description
Power LED
Power Button
7
1
5
8
2
Device Activity LED
6
UID Button
LAN1 LED & LAN2 LED
Hard Drive Signal
3
7
4
Universal Information LED
8
Hard Drive Fail
Rear View
9
8
7
6
2
3 4
Two 25G
LAN ports
1
1 2
No.
Description
1
2 PCI-E 3.0 x16 (CPU2) Expansion Slots (Full-height 4.2", Length 10.5")
2
PCI-E 3.0 x8 (CPU2) Expansion Slot( Low Profile (2.536"), Half Length (6.6"))
3
VGA Port
UID Button (Unit Identifier Button)
4
5
COM Port
Dedicated LAN for IPMI
6
USB 3.0 Ports
7
8
2-4 LAN Port (Reference LAN port configuration table)
9
Redundant Power Supply Module (See User Manual for LED guidance)
LAN Port Configurations for 1029U-T Series Models
System
LAN Ports
1029U-TR25M
Two 25 GbE
1029U-TR4
Four GbE
1029U-TR4T
Four 10GBase-T
1029U-TRT
Two 10GBase-T
1029U-TRP
Two 10G SFP+
1029U-TRTP2
Two GbE, Two 10G SFP+
Step 1a: Attaching the Non-F Model Processor to the Narrow Processor Clip to
Create the Processor Package Assembly
Align A, B and C, and
DIMMs per Channel (DPC)
insert the CPU by sliding
2 Slots per Channel
notch B and C into the
2DPC (2-DIMM per Channel)
processor clip.
1.2 V
1.2 V
2666
2666
2666
2666
Align Notch B of the
2666
2666
CPU and Notch B of
the Processor Clip
2666
2666
2666
2666
2666
2666
2666
2666
2666
2666
2666
2666
Step 1b: Attaching the F-Model Processor to the Narrow Processor Clip to
Create the Processor Package Assembly
1
Align A, B, C and D, and
4
3
2
insert the CPU by sliding
notch B, C and D into the
processor clip.
6
5
Align Notch C of the
CPU and Notch C of the
Processor Clip
Align Notch B of the CPU
and Notch B of the Processor Clip
8
7
Step 2: Attaching the Processor Package Assembly to the Heatsink to Form the
Processor Heatsink Module (PHM)
5
4
3 2
1
Align A, B, C and D with a, b, c
and d respectively, and snap the
processor package onto the
Two to four
heatsink with the mounting clips
1G/10G LAN ports
at the proper places.
Triangle on the CPU
Triangle on the
Processor Clip
Ultra Riser Card
AOC-URN4-M2TS
AOC-UR-i4G
AOC-URI4XTF
AOC-URN2-i2XT
AOC-URN2-I2XS
AOC-URN2-i4GXS
CPU & Heatsink Installation
Step 3: Installing the Processor Heatsink Module (PHM)
Align pin 1 (the triangle) on the PHM against pin 1 (the triangle) on the CPU socket, and
insert the two diagonal oval holes on the heatsink into the guiding posts. Using a T30
Torx-bit screwdriver, tighten the four screws into the mounting holes starting with the
C
screw marked "1" (in the sequence of 1, 2, 3, and 4).
CPU (Upside Down)
w/CPU LGA Lands up
Align Notch C of the
CPU and Notch C of
the Processor Clip
B
A
Pin 1
C
B
Align CPU Pin 1
CPU/Heatsink Package
(Upside Down)
A
On Locations (A, B), the
notches snap onto the
heatsink's sides
D
Align Notch D of the
CPU (Upside Down)
CPU and Notch D of
w/CPU LGA Lands up
Step 4:
the Processor Clip
C
B
A
Pin 1
D
C
B
CPU/Heatsink Package
(Upside Down)
Align CPU Pin 1
A
Fabric CPU and
Beep Code
b
Processor Clip
1 beep
(Upside Down)
5 short and 1 long
c
5 long and 2 short
d
1 long continuous
B
a
C
!
SAFETY INFORMATION
D
IMPORTANT: See installation instructions and safety warning before
connecting system to power supply.
http://www.supermicro.com/about/policies/safety_information.cfm
!
WARNING:
Heatsink
To reduce risk of electric shock/damage to equipment, disconnect power
(Upside Down)
A
from server by disconnecting all power cords from electrical outlets. If any
CPU socket empty, install protective plastic CPU cap
!
CAUTION:
Always be sure all power supplies for this system have the same power
output. If mixed power supplies are installed, the system will not operate.
For more information go to: http://www.supermicro.com/support
http://www.supermicro.com
LBL-1139-QRG
On Locations of (C, D), the
B
notches snap onto the heat
sink's mounting holes
C
D
A
Make sure Mounting
Notches snap into place
Step 5:
Oval C
Use a torque
of 12 lbf
Oval D
Large Guiding
Post
T30 Torx Driver
#4
#1
#2
Small Guiding Post
#3
Printed Triangle
Mounting the Processor Heatsink Module
Tighten the screws in the
into the CPU socket (on the motherboard)
sequence of 1, 2, 3, 4 (top 3 quarter view)
Beep Codes
Error Message
Description
Refresh
Circuits have been reset (Ready
to power up)
Memory error
No memory detected in the system
Display memory read/
Video adapter missing or with
write error
faulty memory
System OH
System overheat condition
Caution
ÌLBL-1139-QRG-100QÎ
Rev 1.0
Advertisement
