Table of Contents
Advertisement
SuperServer 1029P-MT/MTR User's Manual
Appendix C
System Specifications
Processors
Dual Intel Xeon processor Scalabale Family up to 140W in a Socket P type socket
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel C621 chipset
BIOS
256 Mb AMI® Flash EEPROM
Memory
Eight DIMM slots to support up to 1TB of ECC, 3DS Registered DIMMs (RDIMM), Load Reduced DIMMs (LRDIMM) or 512GB
of ECC RDIMM/LRDIMM DDR4-2666 memory
Note: See the memory section in Chapter 5 for details and our website for updates to supported memory.
SATA Controller
On-chip (Intel C621) controller
Drive Bays
Eight 2.5" hot-swap drive bays for SATA drives
PCI Expansion Slots (supported)
One PCI-Express 3.0 x8 slot (supported by CPU1)
Motherboard
X11DPL-i; ATX form factor (12.07 x 10.15 in. / 307 x 258 mm.)
Chassis
SC113MFTS-605CBP/R608CBP; 1U Rackmount, 17.2 x 1.7 x 19.98 in. / 437 x 43 x 508 mm. (W x H x D)
System Cooling
Four 4-cm PWM fans
Power Supply
1029P-MT: PWS-605P-1H
AC Input Voltages: 100-240 VAC
Rated Input Current: 7.5
Rated Input Frequency: 50-60 Hz
Rated Output Power: 600W
Rated Output Voltages: +5V (18A), +3.3V (15A), +12V (49A), -12V (0.5A), +5Vsb (3A)
1029P-MTR: PWS-608P-1R
AC Input Voltages: 100-240 VAC
Rated Input Current: 7.5
Rated Input Frequency: 50-60 Hz
Rated Output Power: 600W
Rated Output Voltages: +12V (50A), +5Vsb (3A)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
122
Advertisement
Table of Contents
