Table of Contents
Advertisement
2.4 Front panel button description:
"Mode": When pressed displays the modulation option
menus.
"Config": This key when pressed selects the B OUT put,
"Trig":
"Enter: Enters and stores the numeric data which has
"Esc: cancels the current keyboard or rotary dial data
Keyboard buttons
portion of the display of the selected waveform
parameter. Pressing the ENTER key enters the new
data. If the data entered is incorrect, pressing the
Frequency Counter and RS232 menus.
When Burst, ASK, PSK or FSK modulation has
been selected (see chapter on the Trigger
functions), pressing the "Trig" key, the generator
enters the Single trigger mode. Pressing the Trig
key
again
waveform.
The External trigger input is also enabled. A
signal applied to the External trigger input will
externally trigger the generator at the rate of the
External input signal.
been entered from the Key board or the rotary
dial
operation
and
previously entered. If the triggered operation was
previously selected, pressing this key will return
the unit to normal operation.
the
generator
displays
enters data values in to the upper
7
will
output
the
data
that
one
was
Advertisement
Table of Contents
