Store/Recall - Protek B8000FD Series Operator's Manual

duration
To exit the trigger mode, press the "Esc" button. The "trig"
symbol will disappear in a non modulation mode or the (T) in a
modulation mode and the instrument will return to the internal
trigger mode.
7.0 Store /Recall (B8040FD)

--- STORE/RECALL---

Memory:
Fig 29
The Store and recall buttons are located on the same button
as the ENTER and ESC buttons. Waveforms and waveforms
parameters may be saved in memory and recalled at a later time
using these functions.
Pressing the Enter/Recall button displays the menu shown in
Fig 28 above; rotate the encoder knob to the location the
waveform settings are to be saved, press the ENTER button to
save the settings.
To Recall a waveform setting press the ESC button and
rotate the encoder knob to the location where the settings are
stored. Press again to recall the settings.
26