range for better stability. When the frequency of the input signal
is greater than 100 kHz, use the "100KHz to 1 00MHz" range to
prevent errors.
5.4 RS-232
RS-232,
Fig 27
RS-232, 9600, N,8,1: 9600 Baud rate, no parity bit; 8 bit data;
1 bit stop.
Quit:
Disables RS 232 and exits the menu
Users can utilize the instrument's instruction set to
communicate with the PC and remote control the instrument
The Instruction set are character strings of up to 15
Characters. Each string controls a specific function or
parameter of the function generator. Fig 28 lists the character
string and the function or parameter controlled.
WAVE:SIN
WAVE:SQUARE
WAVE:TRIANGLE
WAVE:RAMPUP
WAVE:RAMPDOWN
WAVE:NOISE
WAVE:SINX/X
WAVE:EXPUP
WAVE:EXPDOWN
9600, N,8,1
quit
output sine wave
output square wave
output triangle wave
output rising ramp wave
output falling ramp wave
output noise
output SIN(x)/x
output exponential up
output exponential down
23