Do not apply voltage to the output connector.
4)
Do not apply voltage over 10V
5)
. Do not use or store this instrument in a location near heat
6)
source or in a place subject to high humidity.
This instrument should only be serviced by a competent
7)
electronics technician
2 Unit Description
Fig 1
1
2.0 Panel description
2.1 Front Panel outputs:
There are 3 BNC signal outputs on the front panel.
Main OUTPUT:
SYN:
This output is a TTL level signal which is active for
all waveforms except Sine and square waves. It is the
3
2
6
Main output with an impedance of 50 Ω
to the input connector.
P-P
10
7
3
4
8
9
5