Versions; Additional Information - Festo CMMO-ST-C5-1-DIOP Manual

About this document
1.3

Versions

This documentation refers to the following version of the motor controller:
– Firmware: V 1.2.x and above
– FCT plug-in: CMMO-ST V 1.2.x and above
Firmware What is new?
V 1.0.x and The motor controller supports
– the positioning system for EPCO electric cylinders
above
– Festo drives with stepper motor EMMS-ST
– custom drive
V 1.1.2 and Advanced parameter settings for positioning systems
above via web browser
V 1.2.1 and The motor controller supports additional positioning
above systems, such as:
– Toothed belt axis ELGR
– Electric semi-rotary drive ERMO
Tab. 2: Software versions
The hardware version, firmware version and serial number are displayed with an active online connec-
tion:
è FCT configuration software ("Controller" screen and "Online/Output" window)
è "Diagnostics" screen of the integrated web server
If an online connection is currently unavailable, information relating to the last connection will be
displayed.
Additional product data, e.g. revision è product labelling of the motor controller.
NOTICE
Before using a newer firmware version:
• Check whether a newer corresponding version of the FCT plug-in or user documentation is available
è www.festo.com/sp.
1.4

Additional information

– Contact the regional Festo contact if you have technical problems è www.festo.com.
– Accessories è www.festo.com/catalogue.
Festo — CMMO-ST-C5-1-DIOP/DION — 2022-05e
Which FCT plug-in?
CMMO-ST V 1.0.0 and
above
CMMO-ST V 1.1.0 and
above
CMMO-ST V 1.2.0 and
above
5