Table of Contents
Advertisement
150-204-100-03, Issue 3
7
Rotate the main chassis up and snap it into the backplate friction clasps
8
Reattach the side panel and tighten the 216 HEX security nut to secure it to the main chassis.
When the main chassis is attached to the backplate, it can be rotated down to provide access
to the backplane connector and other internal areas. Unlatch the chassis from the two friction
clasps in the upper corner of the backplate to lower it. See
HRE-204 List 1 and List 2
Figure 6. Wall Mounting and Hinging View
May 7, 1999
(Figure
6).
Figure 6
for hinging details.
Installation
7
Advertisement
Table of Contents
