Table of Contents
Advertisement
Quick Links
OPERATION AND MAINTENANCE MANUAL
Attention!
TR0309/TR0612 is belonging to high torque series. For safety consideration,
please collaborate it with Auxiliary Arm(KP-AUXA-2).
DC-TYPE Automatic Non-Carbon Brush Series
MY9-TR0206L
MY9-TR0309L
MY9-TR0612L
MY9-TR0206P
MY9-TR0309P
MY9-TR0612P
SAING EI CORP.
https://www.mytorqtools.com
Y2F168A-2E-005
Advertisement
Table of Contents
Related Manuals for MYTORQ MY9-TR0206L
Summary of Contents for MYTORQ MY9-TR0206L
- Page 1 OPERATION AND MAINTENANCE MANUAL MY9-TR0206L MY9-TR0309L MY9-TR0612L MY9-TR0206P MY9-TR0309P MY9-TR0612P Attention! TR0309/TR0612 is belonging to high torque series. For safety consideration, please collaborate it with Auxiliary Arm(KP-AUXA-2). DC-TYPE Automatic Non-Carbon Brush Series SAING EI CORP. https://www.mytorqtools.com Y2F168A-2E-005...
- Page 2 NOTICE Metal Assembly Screwdrivers are designed for installing threaded fasteners in light industrial and appliance manufacturing applications. SAING EI is not responsible for customer modification of tools for applications on which SAING EI was not consulted. WARNING Important safety information enclosed. Read all these instructions before placing tool in service or operation this tool and save these instructions.
-
Page 3: Important Safety Rules
Important Safety Rules WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious injury. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated (cordless) power tool. - Page 4 d) Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Do not let visitors touch the tool or extension cord. All visitors should be kept away from work area. e) Maintain power tools.
-
Page 5: Do Not Operate This Tool Without Protective Earth Connected
WARNING！ DO NOT OPERATE THIS TOOL WITHOUT PROTECTIVE EARTH CONNECTED Grounding Instructions 1、This tool should be grounded while in use to protect the operator from electric shock. NOTICE! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors. - Page 6 Operations Cautions 1) Before changing bits from BNK Series screwdriver, make sure the Forward / Reverse switch stays at “OFF “position. The screwdriver must be unplugged. 2) To avoid damaging the housing of screwdriver, do not allow chemicals get in touch with housing of screwdriver. Ex.: Acetone, benzene, thinner, trichloroethylene ketone, and other similar chemicals.
-
Page 7: Description Of Operation
Lo for slowest rotation. It's possible that the uncompleted shut-off occurs when the switch is setup to Lo and the presetting torque is more than 50% of torque range. Please refer to the following table. Lo Switch MY9-TR0206L MY9-TR0309L MY9-TR0612L... -
Page 8: Do Not Attempt To Repair This Electric Screwdriver
3. SAING EI is not responsible for customer modification of tools for applications on which SAING EI was not consulted. 4. Repairs should be made only by authorized, trained personnel. Consult your nearest MYTORQ authorized service center. 5. It is the responsibility of the employer to place the information in this manual into the hands of the operator. -
Page 9: Specifications
Specifications MY9-TR0206L MY9-TR0309L MY9-TR0612L MODEL MY9-TR0206P MY9-TR0309P MY9-TR0612P Input voltage (DC) DC 40V Power Consumption hard joints 6~12 Torque (N.m) soft joints 80%↓ 2~4.8 3~7.2 6~9.6 Repeatable Torque Accuracy (%) ±5% Torque Adjustment Stepless Unloaded Rotation Speed (R.p.m) 1000 1000 ±10%... -
Page 10: Torque Adjustment Operation
Torque Adjustment Operation To adjust the torque on these screwdrivers. Proceed as follows : 1. Determine the torque output of the tool by checking a tightened Fastener with a torque wrench. 2. Increase or decrease the torque by rotating the Spring Adjusting Ring. Rotating the Ring clockwise to a higher number on the torque Scale increase torque output while rotating the Ring counterclockwise to a lower number decreases the torque output.
Need help?
Do you have a question about the MY9-TR0206L and is the answer not in the manual?
Questions and answers