Safety At Work - ISA T1000 PLUS User Manual

DOC. MIE91093
S AFE TY AT W O R K
The Product
tested according to the specifications, and when used for
normal applications and within the normal electrical and
mechanical limits will not cause hazard to health and safety,
provided that the standard engineering rules are
and that it is used by trained personnel only.
The application guide is published by the Seller to
together with the Product described in the corresponding
document. The Seller reserves the right to modify the guide
without warning,
only, the adoption of more advanced technological solutions
and modified manufacturing procedures, and also the addition
of other features, not available in the first release.
The Seller declines any
technical problems. The Seller declines also any responsibility
in case of modification of the Product or of any intervention
not authorized by the Seller in writing.
The warranty includes the repair time and the materials
necessary to restore the complete efficiency of the Product;
so, it does not include other burdens, such as the transport
and customs fee. Under no circumstances the warrantee
includes any cost that the User may have suffered because of
the Product unavailability and downtime.
The Product is CE marked, and has been tested to operate
according to EN 61010-1, with the following operating
conditions:
. Pollution degree 2: normally, non conductive pollution
occurs;
. Measurement category 2, for measurement inputs.
Would the test set be used beyond these limits, the
safety of the test set could be impaired.
Rev. 1.34
hereafter described
for any reason.
difficulties arising from unknown
Page 8 of 145
is manufactured
This includes also but not
and
observed
be used