Safety Instructions - Gossen MetraWatt METRAHIT PM TECH Operating Instructions Manual

1

Safety Instructions

Observe this documentation, in particular all included safety infor-
mation, in order to protect yourself and others from injury, and to
prevent damage to the instrument.
• Carefully and completely read and adhere to these operating
instructions.
The document can be found at http://www.gossenme-
trawatt.com. Retain this document for future reference.
• Observe and comply with all safety regulations which are appli-
cable for your work environment.
• Wear suitable and appropriate personal protective equipment
(PPE) whenever working with the instrument.
• The instrument may only be operated by persons who are ca-
pable of recognizing contact hazards and taking the appropri-
ate safety precautions.
Touch hazards in accordance with the standard prevail any-
where, where dangerous voltages may occur.
Avoid working alone when taking measurements which involve
touch hazards. Be certain that a second person is present.
• Use only the specified accessories (included in delivery or
listed as optional) with the instrument.
• Carefully and completely read and adhere to the product docu-
mentation of the optional accessories. Retain these docu-
ments for future reference.
• The instrument may only be used as long as it's in good work-
ing order.
Inspect the instrument before use. Pay particular attention to
damage, broken insulation or kinked cables.
Gossen Metrawatt GmbH
• Accessories and cables may only be used as long as they're
fully intact.
Inspect all cables and accessories before use. Pay particular
attention to damage, broken insulation or kinked cables.
• If the instrument or an accessory doesn't function flawlessly,
remove it from operation and secure it against inadvertent use.
• If the instrument or accessory is damaged during use, e.g.
through falling, remove it from operation and secure it against
inadvertent use.
• Do not use the instrument after long periods of storage under
unfavorable conditions (e.g. humidity, dust or extreme tem-
perature).
• Do not use the instrument after extraordinary stressing due to
transport.
• Only use the instrument and the accessories in compliance
with the specified technical data and under the specified con-
ditions (ambient conditions, IP protection class, measuring cat-
egory, etc.).
• Do not use the instrument in potentially explosive atmo-
spheres.
• The instrument and the included accessories may only be
used for the tests/measurements described in the instrument's
documentation.
• Maximum allowable voltage between the voltage measuring
terminals, and between all connections and earth is 1000 V for
measuring category III, or 600 V for measuring category IV.
The METRAHIT EU PRO / E
measuring category CAT III 600 V.
Safety Precautions
variant is an exception with
SPECIAL
6