Table of Contents
Advertisement
1.800.544.2843
BEFORE TESTING
CHECKLIST
o Clean particle filter
o Water trap and probe line are
free of condensate
o All hose and thermocouple
connections are properly
secured
o Water trap is fitted correctly
o Power on and zero
o Flue gas probe is sampling
ambient FRESH air
SCREEN
AUXILIARY
CO/CO2
O2/EFF
TEMP/PRS
EXCH TEST
AUX
STATUS
ROOM CO
v3
L I N K
C165+
The AUX screen allows you
to assign any of the following
parameters on any display line.
CO
, CO, NO (if fitted), NOx
2
(if fitted), O
, TF, Ti, Ta, Delta
2
(∆), Loss, EFg, Xair, Ra (CO/
CO
Ratio), PI, Fuel Type, PRS
2
or Blank.
To customize the settings
displayed on screen.
.
Rotate dial to
Scroll
or
to SCREEN.
Press
.
to AUX.
Scroll
or
Press
.
www.calcert.com
15
10
20
5
25
0
30
Remove the rubber boot and red
drain plug. Allow the water to
drain out. Re-insert the rubber
plug and replace boot cover.
Scroll
or
to select
the line to change.
Press
.
Highlighted line shows
current selection.
Scroll
or
to change
parameters.
Press
to select.
Scroll
or
to select
another line to customize
and repeat.
When finished, scroll
or
to BACK.
Press
.
Remove protective rubber boot.
Remove water trap from analyzer.
Remove particle filter from water
trap and replace with new one.
Reattach trap and boot.
CO/CO2
O2/EFF
TEMP/PRS
AUX
EXCH TEST
STATUS
ROOM CO
v3
L I N K
C165+
When performing a
combustion Test.
Rotate function rotary dial to
AUX to Test while viewing
custom parameters that you
selected.
sales@calcert.com
Advertisement
Table of Contents
