Page 1
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com []!] ( ™ TEST INSTRUMENTS C162/C163/C164 Flue Gas Combustion Analyzer with Heat Exchanger Test TECHNOLOGY INSTRUCT/ON MANUAL ENGLISH 5.00% 9.00% 154F 09:42 ► RoHS Compliant REACH Compliant...
SYMBOLS Low battery Degrees Fahrenheit ·c Degrees Celsius Pump Status □ ® Pump Start Pump Stop ® � Hold Printing • Navigate Down Navigate Up Enter Key Save Log ANALYZER OVERVIEW A. Infrared Printer Port B. On/ Off (Power) Button C.
DISPLAY PARAMETERS The large display is backlit with 6 lines, the last line is the Status Bar line. Menu Screen Time (settable parameter; HH:MM:SS, displayed in 24 hour clock format) Date (settable parameter; DD:MM:YY) Header (settable parameter; 16 character, 2 line; 10 characters can be added to Line 1 of the header, 6 characters to Line 2) IR Print (KMIRP2 or IRP-2) ˚C/˚F (settable parameter) NOx Ref (settable parameter;...
Temp/Prs Screen Default Selections Are: T1 (displayed in For C) T2 (displayed in For C) llT (displayed in For C) P (displayed in unit selected; mBar, lnH20, hPa, mmHg, PSI, kPa, Pa, mmH20) (C163 & C164 only) Exch Test Screen Default Selections Are: 02 (displayed in%) (displayed in p)
SPECIFICATIONS Parameter Range Resolution Accuracy Temperature Measurement Flue Temperature 32˚ to 1112˚F (0˚ to 600˚) 0.1˚F (0.1˚C) ±0.5˚F (0.5˚C) Inlet Temperature (Internal Sensor) 32˚ to 122˚F (0° to 50°C) 0.1˚F (0.1˚C) ±1˚F (1˚C) Inlet Temperature (External Sensor) 32˚ to 1112˚F (0˚ to 600˚) 0.1˚F (0.1˚C) ±0.5˚F (0.5˚C) Flue Gas Measurement...
P OWERING OFF - - - - - - - - - - - - - - - - - � When you power off the analyzer, there is a 10 second purge. Make sure you do not exceed the analyzer' s operating specifications. In particular: °...
Charges will be applied upon completion of the recertification service. Shipping time for most repairs is 1 to 3 days. UEi pays return freight. RETURNING YOUR ANALYZER Before returning your analyzer to UEi Test Instruments, please ensure that you enclose:...
UEi’s electronic combustion analyzers perform the measurements on a continuous basis, and can calculate the efficiency as adjustments are being made. Combine this with a printout and you are able to provide a before and after comparison of the combustion equipment in relatively little time as part of normal servicing.
If within the warranty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at UEi's option. This warranty covers normal use and does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident, misuse, abuse, neglect or improper maintenance.
Need help?
Do you have a question about the C164-N and is the answer not in the manual?
Questions and answers