Kyocera FS-C5025N Supplementary Manual page 96

Configuration Using ftp
The violet colored text in Figure 1 shows user input. The following directions correspond with the red numbers in Figure 1.
1. Change to the directory that you would like the configuration file to be copied to.
2. Open an ftp session with the source IB-23.
3. Enter admin as the User.
4. Enter the Admin password. If the user name and password are verified, the ftp session should respond with "User
Logged in."
5. Enter get config to read all settings to a file called config.
6. Enter quit or bye to exit the ftp session.
7. A directory listing shows that there is now a file in the current directory called config.
;;; General ;;;
;Admin Password
Firmware Update Utility
LAN Interface
;;; TCP/IP ;;;
TCP/IP Protocol
Host Name
IP Address
Subnet Mask
Default Gateway
DHCP
BOOTP
RARP
ARP/PING
Bonjour
Bonjour Name
FTP Status Check
;;; DNS ;;;
DNS Server (Primary)
DNS Server (Secondary)
Domain Name
;;; WINS ;;;
WINS Server (Primary)
WINS Server (Secondary)
Scope ID
;;; IP Filter ;;;
IPFILTER1 Start Address
IPFILTER1 End Address
IPFILTER1 Protocol
IPFILTER2 Start Address
IPFILTER2 End Address
IPFILTER2 Protocol
IPFILTER3 Start Address
IPFILTER3 End Address
IPFILTER3 Protocol
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\ftp.htm
= "*****"
= ENABLE
= AUTO
= ENABLE
= "KM123456"
= 10.10.10.220
= 255.255.255.0
= 10.10.10.1
= ENABLE
= ENABLE
= ENABLE
= ENABLE
= ENABLE
= "KM123456"
= DISABLE
= 207.214.73.16
= 207.214.140.10
= ""
= 192.168.1.1
= 0.0.0.0
= ""
= 10.10.10.40
= 10.10.10.55
= "LPD, FTP, IPP, HTTP, SNMP, RAW Port"
= 10.10.10.55
= 10.10.10.73
= "LPD"
= 0.0.0.0
= 0.0.0.0
= ""
2/5 ページ
2006/05/26