E-Mail Reports - Kyocera FS-C5025N Supplementary Manual

E-mail Reports via SMTP (Simple Mail Transfer Protocol)

E-mail Reports

A variety of report types are available. See the following sections for descriptions of the various report types:
Error Notification
Scheduled Reports
Error Notification
The printer can be configured to send e-mail notifications whenever any error conditions occur. Setup error notification
after configuring the SMTP
1. On the SMTP General page, select an E-mail Recipient to configure (to the right of General).
2. For Recipient [#] Address enter the e-mail address of the intended recipient. Entering a distribution list address is
a simple way to send to multiple recipients.
3. Under Event Reports check the box for each type of error condition to be reported to the recipient.
4. Enter the E-mail Interval. An e-mail will be sent at the end of the interval only when at least one of the selected
error conditions has occurred during the interval.
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\smtp.htm
Figure 3. SMTP Authentication
connection.
4/6 ページ
2006/05/26