Kyocera FS-C5025N Supplementary Manual page 55

Unix Printing
Printing, Canceling a Print Job, and Checking Queue Status
The commands for these functions are explained in the
IBM AIX 4.x.x Setup
The instructions below are for AIX 4.1.5. The commands and paths listed in the following procedures may vary slightly
depending upon the OS version.
Configuring the Print System
1. Login as root.
# login root
2. Add the print server.
Following is an example using sales820ptr as the print server name:
# ruser -a -p sales820ptr
3. Start remote printer daemon.
# startsrc -s lpd
# mkitab 'lpd:2:once:startsrc -s lpd'
Creating the Print Queue
1. Execute smit and select "Add Print Queues".
#smit mkrque
2. From the list, select "remote" (printer connected to remote host).
3. Select "Standard processing" from the list.
4. Setup the following items on the "Add a Standard Remote Print Queue" screen. (For items other than the ones
below, modify as necessary according to your environment.)
The following example uses sales820ptr as the print server name (IB-23 host name) and sales820q as the
print queue name:
Item
Name of QUEUE to add
HOSTNAME of remote server
Name of QUEUE on remote server
TYPE of print spooler on remote server
DESCRIPTION of printer on remote server
Printing, Canceling a Print Job, and Checking Queue Status
The commands for these functions are explained in the
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\unix.htm
Printing, Canceling a Job, and Checking Status
Printing, Canceling a Job, and Checking Status
section.
Entry
sales820q
sales820ptr
lp1
BSD
[comments]
section.
4/8 ページ
2006/05/26