Kyocera FS-C5025N Supplementary Manual page 87

E-mail Reports via SMTP (Simple Mail Transfer Protocol)
Establish Connection to the SMTP Server
1. Enable the SMTP Protocol.
2. Set the SMTP Port Number or use the SMTP default port 25.
3. In SMTP Server Name, enter the server name or IP address. When using a server name instead of an IP address,
you must designate the DNS server address. Enter it in the DNS server setting by clicking TCP/IP > General in the
left menu.
4. Click the Test button to check for a successful connection to the SMTP server. If the test fails, double check the IP
address or name and DNS settings. Also consider firewall issues and see
Define Basic SMTP Settings
1. Enter the Sender Address. The sender address is often set to the address of the person responsible for the
printer, such as the printer administrator, so that a reply or non-delivery report will go to a person rather than to the
printer.
2. Enter the Subject. The subject is the text that will appear in the subject line of all e-mails sent from the printer. Any
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\smtp.htm
Figure 1. SMTP General Page
SMTP Authentication below.
2/6 ページ
2006/05/26