Kyocera FS-C5025N Supplementary Manual page 26

Windows Printing: TCP/IP
2. Double click Network.
3. Click the Configuration tab and locate TCP/IP -> .....
If TCP/IP -> (Network adapter name) is not in the list, click on Add to install it. For details on installing network
services and protocols in Windows, refer to the Windows documentation or Help.
You can verify the IP address, subnet mask, and gateway currently set for your PC by selecting TCP/IP ->
(Network adapter name) and clicking Properties.
Creating a KPrint Port for TCP/IP Printing
The KPrint Port is a printer port you create in Windows to print from the printer driver to the network card's IP address.
This is why we include KPrint, a dedicated utility for the IB-23. KPrint enables you to create the TCP/IP port.
Once installed, you can use the KPrint utility to create the port in Windows for any IB-23 present in the network. If you
have not already done so, install the KPrint utility following the procedure in
Using TCP/IP Port:
1. Run the KPrint Add Port wizard by selecting Windows Start, All Programs, and Kyocera, and clicking KPrint
Add Port.
2. Select the mode to use and click Next. Check with your network administrator regarding which mode you should
use.
3. In IP address or host name below, enter the IP address of the IB-23 to connect. If you click Search, the IB-23
Search window opens. This will search and list all available IB-23 in the network. Select the IB-23 you want to
connect the TCP/IP port.
If you click Configure, you can modify the scope of the search by specifying one or more specific network
segment addresses. In the Search Configuration window, enter the network segment followed by '255,' e.g.
'171.62.186.255.' This causes the search to be conducted only in the '171.62.186.0' segment.
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\windows_printi...
Figure 1. TCP/IP Protocols in Network Protocols
Installing the Software Utilities.
2/4 ページ
2006/05/26